## Quality Assurance Composite Assembly Inspector (Temporary)Apply: Fort Erie: Full time: Posted Today: JR10440524****Job Description:********MAIN RESPONSIBILITIES********Assembly Inspection/Paint Inspection***** **Visual Inspection*** **Verify potting material shelf life*** **Verify that inserts, components, etc. are installed as per drawing.*** **Visual Inspection for improper or insufficient coverage, rough surfaces, pitting.*** **Dust inclusions, orange peel, tears, sagging or blistering.*** **Inspecting parts to planned MIDs and Inspection documents , drawings etc.*** **Recording of nonconformities and quarantining non conforming parts with red tags.*** **Create and maintain inspection plans and procedures.*** **Participate and lead root cause and corrective action process using Rapid 5 Whys, 8D tools etc..*** **Perform First Article Inspections to AS9102 requirements.*** **Execute inspections to planned weekly and daily KPIs to Assembly Inspection Plans.*** **Serve as a guide to Assembly technicians by sharing requirements and acceptance criteria for Inspection.*** **Participate in all initial and recurrent training to maintain certifying staff authorities.******Trim Inspection***** **Verification of tool validity*** **Visual Inspection*** **Inspection of parts to planned MIDs and Inspection documents , drawings etc.*** **Participate and lead root cause and corrective action process using Rapid 5 Whys, 8D tools etc.*** **Recording of nonconformities & quarantining non conforming parts with red tags.******Shipping Inspection***** **Verify that all inspection stages have been completed.*** **Inspecting parts to planned MIDs and Inspection documents ,



drawings etc.*** **Recording of nonconformities & quarantining non conforming parts with red tags.*** **Preparation of shipping documentation including Form Ones and C of Cs.*** **Execute inspections to planned weekly and daily KPIs to Assembly Inspection Plans.*** **Participate in all initial and recurrent training to maintain certifying staff authorities.*** **Participate and lead root cause and corrective action process using Rapid 5 Whys, 8D tools etc.******Lay-up Inspection***** **Review all materials in kits for shelf life & out life remaining*** **Verification that all materials have been cut & identified with ply number & orientation*** **Verification that Material Identification Sheets are complete.*** **Verification validity of tooling.*** **Visual Inspection to planned MIDs and Inspection documents , drawings etc.*** **Execute inspections to planned weekly and daily KPIs to Assembly Inspection Plans.*** **Participate and lead root cause and corrective action process using Rapid 5 Whys, 8D tools etc.*** **Serve as a guide to Layup technicians by sharing requirements and acceptance criteria for Inspection.*** **Recording of nonconformities & quarantining non conforming parts with red tags.******Core Inspection***** **Verification validity of tooling*** **Verification of conformity to templates and drawings*** **Visual Inspection for damage, cell ruptures,



contamination dust /oil*** **Inspection of parts to planned MIDs and Inspection documents , drawings etc.*** **Recording of nonconformities & quarantining non conforming parts with red tags.*** **Execute inspections to planned weekly and daily KPIs to Assembly Inspection Plans.*** **Participate and lead root cause and corrective action process using Rapid 5 Whys, 8D tools etc.******MINIMUM JOB REQUIREMENTS********Education:***** **College Diploma (Mechanical Engineering Technician or Technologist) or relevant experience******Experience:***** **5 years of composite experience (Manufacturing/Assembly Inspection), specifically with a Quality Assurance System (ISO 9001, AS 9100)*** **NDT/Ultrasonic Inspection experience an asset******Knowledge, Skills, Demonstrated Capabilities:***** **Ability to work under broad supervision*** **Independent and able to work with a team*** **Attention to detail*** **Able to manage time effectively and prioritize work*** **Skilled working relationships with internal and external sources, including regulatory and quality certified agencies*** **Able to work under pressure to meet demanding work schedules*** **Excellent verbal and written communication skills*** **Excellent problem solving skills*** **Able to write accurate technical reports*** **Ability to read various Blueprints*** **Able to use measurement tools**This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.********Company:********Airbus Helicopters Canada Ltd**Employment Type:**Fixed term
#J-18808-Ljbffr

📌 Quality Assurance Composite Assembly Inspector (Temporary) (Ontario)
🏢 Airbus
📍 Ontario