Senior Process (Calgary)

Senior Process (Calgary)

19 Nov
|
CANEIL
|
Calgary

19 Nov

CANEIL

Calgary

ABOUT CANEIL CANEIL is building a carbon capture (CCUS) team for an upcoming client project in Alberta, starting January 2027. The work involves point-source CO₂ capture integrated with an existing facility: flue gas collection and ducting, solvent-based absorption and regeneration, and CO₂ compression, dehydration, and pipeline or storage interfaces. Roles are based in Calgary, with in-office work at the client's office preferred; remote or hybrid arrangements may be considered for candidates with extensive carbon capture experience. OPEN POSITIONS
• Senior Process Engineer – Carbon Capture (CCUS)
• Mechanical Senior Engineer 1 – Absorption Systems
• Mechanical Senior Engineer 2 – Compression & Chilling
• Designer – Flue Gas / Exhaust Ducting Please note in your application which role(s) you are applying for. Candidates may be considered for more than one role. SENIOR PROCESS ENGINEER – CARBON CAPTURE (CCUS) Lead the process design of the capture facility from technology selection through FEED, detailed design, and startup. RESPONSIBILITIES
• Evaluate capture technologies (amine and advanced solvents, sorbents, membranes) for capture rate, energy use, cost, and integration with the host facility.
• Prepare and review the design basis, heat and material balances, PFDs, P&IDs;, data sheets, relief load summaries, and control narratives.
• Develop process simulations of absorption, regeneration, CO₂ dehydration, and compression; optimize regeneration energy and heat integration.
• Define CO₂ product specifications and address solvent degradation, emissions, and corrosion.
• Lead HAZOP/LOPA reviews, review licensor and vendor performance guarantees, and coordinate with other disciplines and EPC partners.
• Support commissioning, startup, proposals, and funding submissions, and mentor junior engineers. REQUIREMENTS
• Bachelor's degree in Chemical or Process Engineering.
• 10+ years of process engineering in oil and gas, gas processing, refining, petrochemical, power, or similar industry, including 5+ years on carbon capture or closely related gas treating (amine treating, acid gas removal, CO₂ recovery).
• Process deliverables on projects that reached FEED, detailed design, or construction.
• Strong knowledge of absorber/stripper design and expert use of Aspen Plus, HYSYS, ProMax, or ProTreat.
• Understanding of CO₂ dehydration, compression, and dense-phase pipeline specifications; API 520/521, ASME B31.3, CSA Z662/Z741.




• Lead process experience on a capture project, brownfield integration, and familiarity with the CCUS Investment Tax Credit and Alberta's TIER program are strong assets. MECHANICAL SENIOR ENGINEER 1 – ABSORPTION SYSTEMS Lead the mechanical design and specification of the absorption and solvent regeneration equipment, working closely with the process lead, licensor, and fabricators. RESPONSIBILITIES
• Mechanical design of absorber, stripper, wash, and direct contact cooler columns, including shells, nozzles, supports, and platforms.
• Specify column internals (packing, distributors, collectors, demisters) and solvent-handling equipment (lean/rich exchangers, reboilers, pumps, filtration, tanks).
• Select materials for amine and wet CO₂ service with process and corrosion specialists.
• Prepare data sheets and requisitions, run bid evaluations, review vendor drawings, and plan fabrication, modularization, transport, and installation. REQUIREMENTS
• Bachelor's degree in Mechanical Engineering.
• 10+ years of mechanical/static equipment experience in heavy industry, including 5+ years on pressure vessels and columns with internals.
• Working knowledge of ASME Section VIII, ABSA/CSA B51, API 650, and PV Elite or COMPRESS.
• Amine, acid gas, or carbon capture plant and large or field-erected tower experience are strong assets. MECHANICAL SENIOR ENGINEER 2 – COMPRESSION & CHILLING Lead the CO₂ compression and chilling systems, from specification and vendor selection through testing and startup. RESPONSIBILITIES
• Specify and select CO₂ compression trains (integrally geared centrifugal, reciprocating, dense-phase pumps), drivers, coolers, and lube and seal systems.
• Specify refrigeration and chilling systems, including chillers, chilled water, cooling water, and air coolers.
• Run bid evaluations, coordinate anti-surge and pulsation/vibration studies, review vendor data, and witness factory tests.
• Integrate with process on dehydration and pipeline delivery, and support commissioning. REQUIREMENTS
• Bachelor's degree in Mechanical Engineering.
• 10+ years of mechanical or rotating equipment experience in heavy industry,



including 5+ years with gas compressors and refrigeration or chilling packages.
• Working knowledge of API 617, 618, 614, 610, and 661, ASME B31.3, and CSA B52.
• CO₂ compression for CCS, EOR, or dense-phase service is a strong asset. DESIGNER – FLUE GAS / EXHAUST DUCTING Lay out and model the large-diameter ductwork that carries flue gas from the host facility's existing stacks, boilers, or heat recovery units to the capture plant and back. RESPONSIBILITIES
• Design duct routing, transitions, stiffeners, supports, expansion joints, dampers, drains, and insulation, including tie-ins to existing stacks using laser scans.
• Produce general arrangement, fabrication, and support drawings, MTOs, and tie-in packages.
• Coordinate with mechanical, structural, process, and piping disciplines and support construction. REQUIREMENTS
• Diploma in Mechanical Engineering Technology or Drafting/Design.
• 8+ years designing industrial ductwork for boilers, HRSGs, power plants, or emissions control systems.
• Proficiency in AVEVA E3D/PDMS, Smart 3D, or AutoCAD Plant 3D, Navisworks, and point-cloud scans.
• FGD, SCR, or carbon capture retrofit experience and a CET or P.
Tech. designation are assets. FOR ALL ROLES REQUIREMENTS
• P.
Eng. with APEGA (engineering roles) or eligibility to register within a reasonable timeframe.
• Legally eligible to work in Canada and available to start in early 2027.
• Strong communication skills and comfort working embedded with a client team. WHY JOIN CANEIL
• High-impact carbon capture work in one of Canada's most active CCUS markets.
• Shape the design from an early stage in a growing multidisciplinary team.
• Full-time permanent or contract options, and support for continuing education and licensure. COMPENSATION & BENEFITS
• Expected starting base salary range: $120,000 – $170,000 per year. Placement within this range is heavily dependent on the role and on each candidate's experience, qualifications, and professional designation.
• Contract rates are also available for these positions.
• Advantages for eligible full-time employees, including extended health, dental, and paid vacation.
• Flexible in-office, hybrid, or remote arrangements, subject to project and client requirements.

HOW TO APPLY
Apply through LinkedIn with a current resume, noting the role(s) you are applying for. Only those selected for an interview will be contacted.

📌 Senior Process (Calgary)
🏢 CANEIL
📍 Calgary

Reply to this offer

Impress this employer describing Your skills and abilities, fill out the form below and leave Your personal touch in the presentation letter.

Subscribe to this job alert:

Get the latest job offers by email for: senior process (calgary) / calgary

Subscribe to this job alert:

Get the latest job offers by email for: senior process (calgary) / calgary