Warper (Cambridge)

Warper (Cambridge)

16 Nov
|
MW Canada
|
Cambridge

16 Nov

MW Canada

Cambridge

Overview

Warpers create warp beams for the looms by creeling and warping yarn that has been processed in the plant or received from an external supplier.

The two main duties of this position are: 1) Creeling (set-up of yarn) and

2) Warping/Beaming (the creation of beams).

Main Duties and Responsibilities

Creeling

- Remove empty or partial cones from the creel and return cones with usable yarn to the appropriate box (verify cone labels against box labels)
- Clean creel using an air hose and sweep up area
- Ensure that both the Warp Plan (design) and the Warp Sheet (order) are at the machine
- Mount partial or full cones on the creel according to the Warping Plan (1-2 people)
- Tie new cones to the ends from removed cones using a weaver’s knot (1-2 people)
- If required, inform Yarn Lead Hand to remove boxes of yarn from area
- Ensure the completed set-up matches the pattern outlined in the Warp Plan

Warping/Beaming

- Manually pull knots through the front reed of the warper
- Cut and tie off yarn on the creel side of the reed (if reed needs to be changed)
- Change reed, if necessary, according to Warp Plan
- Draw ends through the new reed if it was changed (1-2 people)
- Begin warping and monitor tension, ends out, and cone size on the creel; adjust as required
- When warping is complete, notify the Material Handler to begin the beaming process. The Material Handler will place an empty beam on the warper
- Adjust flanges according to the width of the warp and ensure flanges are tight (ensures consistency in tension)
- Perform beaming in accordance with operating instructions and training




- Repair broken ends and adjust tension during the beaming process

Paperwork and Communication

- Accurately document and record production information
- Complete monthly production sheets (warps produced)
- Maintain Warp Plans in an organized and accessible manner
- Record relevant comments on Beam Labels for downstream processes
- Perform required calculations in accordance with training and work instructions
- Maintain clear and effective communication to support team and machine efficiency

Health and Safety

- Utilize required personal protective equipment, including:  8” (20.32 cm) CSA approved steel toe boots

 Safety glasses when using compressed air

- Adhere to all WHMIS and department-specific safety requirements
- Complete and document pre-shift inspections as required
- Follow all safety procedures provided during orientation and training
- Report unsafe conditions, acts, or equipment issues to the manager
- Maintain a clean and safe work area, including floors, equipment, and walkways
- Comply with all company policies and procedures

General Requirements

- Work independently and collaboratively with co-workers
- Perform tasks as directed by the Weaving Manager




- Report mechanical or product issues immediately
- Direct questions or concerns to the manager
- Assist in training co-workers as required
- Perform other related duties as assigned

Physical Demands

- Standing for the duration of the shift
- Bending: 0-50% of the shift
- Reaching (overhead, eye level, waist, and knee level): 0-50%
- Lifting: 0-25% (2-12 lb yarn packages)
- Pushing/pulling cones: 0-25%
- Walking and standing on cement floors and anti-fatigue mats
- Ability to read and interpret warp plans, reports, and labels
- Use of paging system as required

Workplace

- Uneven walkways or temporary floor irregularities may be present
- Floors may be wet in certain areas due to processing activities
- Dust and airborne fibres may be present
- High noise levels in designated areas
- Temperature fluctuations due to equipment and open doors
- Exposure to forklift emissions
- Potential contact with sharp edges on machinery, tools, or materials

Shifts

- Current Shift

 Days: Monday to Friday

 Production requirements may result in schedule changes; notice will be provided where possible

Minimum Qualifications

- Basic English language skills (reading, writing, speaking, and listening)
- Basic to intermediate Computer skills (login, navigation, data entry, file handling)
- Intermediate math skills
- Legally entitled to work in Canada
- Ability to work a flexible schedule
- Willing to participate in all required training
- Textile and/or warping related experience is an asset

📌 Warper (Cambridge)
🏢 MW Canada
📍 Cambridge

Reply to this offer

Impress this employer describing Your skills and abilities, fill out the form below and leave Your personal touch in the presentation letter.

Subscribe to this job alert:

Get the latest job offers by email for: warper (cambridge) / cambridge

Subscribe to this job alert:

Get the latest job offers by email for: warper (cambridge) / cambridge