Privacy Policy

Job Openings

Machine and Forklift Operator/Skid Steer Operators

Production - Brantford, Ontario

Department

Production

Employment Type

Full-Time

Minimum Experience

Mid-level

Compensation

$22+

North West Rubber has been in business for 50+ years as a recycling industry leader in manufacturing industrial rubber mats. With over 575 employees, NWR has 4 facilities in Canada and the flagship location in Houston Texas. NWR is seeking team players who can exemplify our core values of "RESPECT FOR ALL", "OWN IT", "RESULTS FOCUSED" - If this sounds like a fit for you, we would love to hear from you.

Summary

We are looking to add Machine and Mobile equipment operators to our manufacturing team at our Brantford Location, 321 Henry Street and 300 Henry Street, Branford ON

Job Type: Full-time, permanent

Schedule: 12 hour Rotating Continental Shift/12 hour Continental Straight Shifts

Days 7am-7:15pm and/or Nights 7pm-7:15am

Wknd Shift Skid Steer Operators

Saturday and Sunday 12 hours each day

Days 7am-7:15pm or Nights 7pm-7:15am

Essential Duties And Responsibilities

- Operate equipment used in the production of molded rubber products.
- Operate equipment used in the crumb rubber manufacturing process.
- Forklift Operation.
- Regulate molding temperature, volume, pressure, and time.
- Load, set up, and operate stamping presses to run production and produce quality output.
- Report damaged or malfunctioning equipment to supervisors and or maintenance staff immediately.
- Record machine downtime and assist maintenance personnel during troubleshooting and repair.
- Understand the mixing process well enough to run it (and demonstrate);
- Understand targets and promote their achievement. Ability to document and explain missed targets

Experience

- Experienced in operating presses, injection molding, or die casting equipment.
- Knowledge of rubber, metal, or plastic molding and casting machines or similar.
- operating production equipment in a Manufacturing environment.
- Extensive Forklift operation experience

Physical Requirements

- May be required to bend, squat, kneel, or stand for long periods.
- May be required to lift up to 50 lbs.

#NWRIndeed

Link to This Job

Location

Brantford, Ontario

Department

Production

Employment Type

Full-Time

Compensation

$22+

Privacy Policy

- Terms of Service

© BambooHR All rights reserved.

Privacy Policy

Job Openings

Machine and Forklift Operator/Skid Steer Operators

Production - Brantford, Ontario

Department

Production

Employment Type

Full-Time

Essential Duties And Responsibilities

- Operate equipment used in the production of molded rubber products.
- Operate equipment used in the crumb rubber manufacturing process.
- Forklift Operation.
- Regulate molding temperature, volume, pressure, and time.
- Load, set up, and operate stamping presses to run production and produce quality output.
- Report damaged or malfunctioning equipment to supervisors and or maintenance staff immediately.
- Record machine downtime and assist maintenance personnel during troubleshooting and repair.
- Understand the mixing process well enough to run it (and demonstrate);
- Understand targets and promote their achievement. Ability to document and explain missed targets

Experience

- Experienced in operating presses, injection molding, or die casting equipment.
- Knowledge of rubber, metal, or plastic molding and casting machines or similar.
- operating production equipment in a Manufacturing environment.
- Extensive Forklift operation experience

Physical Requirements

- May be required to bend, squat, kneel, or stand for long periods.
- May be required to lift up to 50 lbs.

#NWRIndeed

Link to This Job

Location

Brantford, Ontario

Department

Production

Employment Type

Full-Time

Essential Duties And Responsibilities

- Operate equipment used in the production of molded rubber products.
- Operate equipment used in the crumb rubber manufacturing process.
- Forklift Operation.
- Regulate molding temperature, volume, pressure, and time.
- Load, set up, and operate stamping presses to run production and produce quality output.
- Report damaged or malfunctioning equipment to supervisors and or maintenance staff immediately.
- Record machine downtime and assist maintenance personnel during troubleshooting and repair.
- Understand the mixing process well enough to run it (and demonstrate);
- Understand targets and promote their achievement. Ability to document and explain missed targets

Experience

- Experienced in operating presses, injection molding, or die casting equipment.
- Knowledge of rubber, metal, or plastic molding and casting machines or similar.




- operating production equipment in a Manufacturing environment.
- Extensive Forklift operation experience

Physical Requirements

- May be required to bend, squat, kneel, or stand for long periods.
- May be required to lift up to 50 lbs.

#NWRIndeed

Link to This Job

Location

Brantford, Ontario

Department

Production

Employment Type

Full-Time

Essential Duties And Responsibilities

- Operate equipment used in the production of molded rubber products.
- Operate equipment used in the crumb rubber manufacturing process.
- Forklift Operation.
- Regulate molding temperature, volume, pressure, and time.
- Load, set up, and operate stamping presses to run production and produce quality output.
- Report damaged or malfunctioning equipment to supervisors and or maintenance staff immediately.
- Record machine downtime and assist maintenance personnel during troubleshooting and repair.
- Understand the mixing process well enough to run it (and demonstrate);
- Understand targets and promote their achievement. Ability to document and explain missed targets

Experience

- Experienced in operating presses, injection molding, or die casting equipment.
- Knowledge of rubber, metal, or plastic molding and casting machines or similar.
- operating production equipment in a Manufacturing workplace.
- Extensive Forklift operation experience

Physical Requirements

- May be required to bend, squat, kneel, or stand for long periods.
- May be required to lift up to 50 lbs.

#NWRIndeed

Link to This Job

Location

Brantford, Ontario

Department

Production

Employment Type

Full-Time

Essential Duties And Responsibilities

- Operate equipment used in the production of molded rubber products.
- Operate equipment used in the crumb rubber manufacturing process.
- Forklift Operation.
- Regulate molding temperature, volume, pressure, and time.
- Load, set up, and operate stamping presses to run production and produce quality output.
- Report damaged or malfunctioning equipment to supervisors and or maintenance staff immediately.
- Record machine downtime and assist maintenance personnel during troubleshooting and repair.
- Understand the mixing process well enough to run it (and demonstrate);
- Understand targets and promote their achievement. Ability to document and explain missed targets

Experience

- Experienced in operating presses, injection molding, or die casting equipment.
- Knowledge of rubber, metal, or plastic molding and casting machines or similar.
- operating production equipment in a Manufacturing environment.
- Extensive Forklift operation experience

Physical Requirements

- May be required to bend, squat, kneel, or stand for long periods.
- May be required to lift up to 50 lbs.

#NWRIndeed

Link to This Job

Location

Brantford, Ontario

Department

Production

Employment Type

Full-Time

Essential Duties And Responsibilities

- Operate equipment used in the production of molded rubber products.
- Operate equipment used in the crumb rubber manufacturing process.
- Forklift Operation.
- Regulate molding temperature, volume, pressure, and time.
- Load, set up, and operate stamping presses to run production and produce quality output.
- Report damaged or malfunctioning equipment to supervisors and or maintenance staff immediately.
- Record machine downtime and assist maintenance personnel during troubleshooting and repair.
- Understand the mixing process well enough to run it (and demonstrate);
- Understand targets and promote their achievement. Ability to document and explain missed targets

Experience

- Experienced in operating presses, injection molding, or die casting equipment.
- Knowledge of rubber, metal, or plastic molding and casting machines or similar.
- operating production equipment in a Manufacturing environment.
- Extensive Forklift operation experience

Physical Requirements

- May be required to bend, squat, kneel, or stand for long periods.
- May be required to lift up to 50 lbs.

#NWRIndeed

Link to This Job

Location

Brantford, Ontario

Department

Production

Employment Type

Full-Time

Compensation

$22+

Privacy Policy

Privacy Policy

Privacy Policy

Job Openings

Machine and Forklift Operator/Skid Steer Operators

Production - Brantford, Ontario

Department

Production

Employment Type

Full-Time

Essential Duties And Responsibilities





- Operate equipment used in the production of molded rubber products.
- Operate equipment used in the crumb rubber manufacturing process.
- Forklift Operation.
- Regulate molding temperature, volume, pressure, and time.
- Load, set up, and operate stamping presses to run production and produce quality output.
- Report damaged or malfunctioning equipment to supervisors and or maintenance staff immediately.
- Record machine downtime and assist maintenance personnel during troubleshooting and repair.
- Understand the mixing process well enough to run it (and demonstrate);
- Understand targets and promote their achievement. Ability to document and explain missed targets

Experience

- Experienced in operating presses, injection molding, or die casting equipment.
- Knowledge of rubber, metal, or plastic molding and casting machines or similar.
- operating production equipment in a Manufacturing environment.
- Extensive Forklift operation experience

Physical Requirements

- May be required to bend, squat, kneel, or stand for long periods.
- May be required to lift up to 50 lbs.

#NWRIndeed

Link to This Job

Location

Brantford, Ontario

Department

Production

Employment Type

Full-Time

Compensation

$22+

Job Openings

Machine and Forklift Operator/Skid Steer Operators

Production - Brantford, Ontario

Department

Production

Employment Type

Full-Time

Essential Duties And Responsibilities

- Operate equipment used in the production of molded rubber products.
- Operate equipment used in the crumb rubber manufacturing process.
- Forklift Operation.
- Regulate molding temperature, volume, pressure, and time.
- Load, set up, and operate stamping presses to run production and produce quality output.
- Report damaged or malfunctioning equipment to supervisors and or maintenance staff immediately.
- Record machine downtime and assist maintenance personnel during troubleshooting and repair.
- Understand the mixing process well enough to run it (and demonstrate);
- Understand targets and promote their achievement. Ability to document and explain missed targets

Experience

- Experienced in operating presses, injection molding, or die casting equipment.
- Knowledge of rubber, metal, or plastic molding and casting machines or similar.
- operating production equipment in a Manufacturing environment.
- Extensive Forklift operation experience

Physical Requirements

- May be required to bend, squat, kneel, or stand for long periods.
- May be required to lift up to 50 lbs.

#NWRIndeed Job OpeningsProduction - Brantford, Ontario

Department

Production

Employment Type

Full-Time

Compensation

$22+

Department

Production

Employment Type

Full-Time

Compensation

$22+

Department

Production

Department

Production

Employment Type

Full-Time

Employment Type

Full-Time

Compensation

$22+

Essential Duties And Responsibilities

- Operate equipment used in the production of molded rubber products.
- Operate equipment used in the crumb rubber manufacturing process.
- Forklift Operation.
- Regulate molding temperature, volume, pressure, and time.
- Load, set up, and operate stamping presses to run production and produce quality output.
- Report damaged or malfunctioning equipment to supervisors and or maintenance staff immediately.
- Record machine downtime and assist maintenance personnel during troubleshooting and repair.
- Understand the mixing process well enough to run it (and demonstrate);
- Understand targets and promote their achievement. Ability to document and explain missed targets

Experience

- Experienced in operating presses, injection molding, or die casting equipment.
- Knowledge of rubber, metal, or plastic molding and casting machines or similar.
- operating production equipment in a Manufacturing environment.
- Extensive Forklift operation experience

Physical Requirements

- May be required to bend, squat, kneel, or stand for long periods.
- May be required to lift up to 50 lbs.

#NWRIndeed

Link to This Job

Location

Brantford, Ontario

Department

Production

Employment Type

Full-Time

Compensation

$22+

Link to This Job

Location

Brantford, Ontario

Department

Production

Employment Type

Full-Time

Compensation

$22+

Link to This Job

Link to This Job

Location

Brantford, Ontario

Department

Production

Employment Type

Full-Time

Compensation

$22+

Location

Brantford, Ontario

Location

Brantford, Ontario

Department

Production

Department

Production

Employment Type

Full-Time

Employment Type

Full-Time

Compensation

$22+

Privacy Policy

- Terms of Service

© BambooHR All rights reserved.

Privacy Policy

- Terms of Service

© BambooHR All rights reserved.

Privacy Policy

- Terms of Service

-

📌 Machine and Forklift Operator/Skid Steer Operators (Brantford)
🏢 North West Rubber Colorado
📍 Brantford