Job Title: Mechanical Installation Technician

Job Description

As a Mechanical Installation Technician, you will assemble and install conveyor systems and an automated grid structure within a large distribution facility.

You will work in small, safety-focused teams, using hand and power tools, lifts, and other equipment to complete precise mechanical installations and support commissioning and go-live activities.

Responsibilities

+ Assemble and install multiple conveyor systems and the automated grid structure according to project specifications and drawings.
+ Install all elements of the grid automation structure and associated peripheral systems, including grid components, cladding, false bottom totes, grid finishing, peripheral stations, maintenance areas, and charging stations.
+ Use a wide range of hand and power tools safely and effectively to complete mechanical assembly and installation tasks.
+ Work on scissor lifts and other access equipment to perform installations at height, following all safety procedures and fall protection guidelines.
+ Support commissioning and go-live activities by assisting with final adjustments, checks, and mechanical troubleshooting as needed.
+ Collaborate closely with small teams to plan daily tasks, coordinate work areas, and ensure installations are completed accurately and on schedule.
+ Follow construction site safety protocols at all times, including the proper use of PPE and adherence to lockout/tagout and equipment operation procedures.
+ Operate forklifts and aerial work platforms (where licensed and assigned) to move materials, components, and tools safely around the site.
+ Interpret measurements accurately using measuring tools and levels to ensure precise alignment, fit, and finish of installed components.
+ Maintain a clean and organized work area, including proper storage and handling of tools, hardware, and materials.
+ Inspect installed components for quality and conformance, and report any issues, defects, or hazards to site supervision promptly.
+ Use personal tool set (as per the required tool list) to perform daily tasks and ensure tools are maintained in safe working condition.

Essential Skills

+ Minimum of 3+ years of experience in conveyor installation, construction labor, millwright work, welding, or similar mechanical installation roles.
+ Strong mechanical aptitude with proven experience in mechanical assembly and installation work.
+ Extensive experience using hand and power tools in a heavy-duty or industrial construction environment.
+ Experience working at heights, including from platforms and scissor lifts, with strict adherence to safety practices.
+ Ability to read measurements and use levels, squares, and other basic layout tools to achieve precise installations.
+ Comfort working on active construction sites and in heavy industrial environments.
+ Demonstrated ability to work safely, follow site rules, and use appropriate personal protective equipment.
+ Solid teamwork skills with the ability to work effectively in small crews to complete complex installations.
+ Forklift and aerial work platform (boom or scissor lift) experience is a strong asset.
+ Valid scissor lift certification (required for all workers before starting).
+ Valid forklift license for at least one in every three workers on the team.

Additional Skills & Qualifications

+ Experience in mechanical trades such as millwrighting, welding, or mechanical construction is an advantage.




+ Prior experience installing conveyors, racking, or automation systems in distribution or industrial facilities.
+ Experience with basic controls or automated systems is beneficial.
+ Ability to operate forklifts and aerial work platforms safely and in compliance with site requirements.
+ Strong problem-solving skills and the ability to adapt to changing priorities on a construction site.
+ Reliable, punctual, and able to commit to extended hours and overtime when required.
+ Personal tool kit meeting the minimum standard tool list, including socket and wrench sets, screwdrivers, hammer, rubber mallet, torpedo level, square, small pry bar, adjustable wrenches, measuring tape, Allen key set, and drift.

Why Work Here?

You will join a long-term, high-impact project with significant opportunities for overtime, especially during peak periods where hours can reach up to 60 per week.

High-performing team members may have the opportunity to transition into permanent roles or move on to new projects, offering continued career growth and stability.

You will gain valuable experience working with large-scale automation and conveyor systems in a modern distribution environment, while developing your skills alongside a professional and safety-focused team.

Work Environment

This role is based on an active construction site within a new distribution facility that houses large-scale grid automation and conveyor systems.

The standard schedule runs from approximately 07:30 to 15:30, Monday to Friday, with additional hours and schedule changes as required.

During peak periods, you may work up to 60 hours per week, typically through five 12-hour shifts or six 10-hour shifts, as discussed and scheduled by the project team.

Work frequently takes place on elevated platforms and scissor lifts, and some team members will operate forklifts to move materials and equipment.

The environment is heavy-duty and industrial, requiring continuous attention to safety.

You must wear appropriate personal protective equipment at all times and follow all site safety procedures.

Workers are expected to bring and use their own tools that meet the minimum standard tool list, including socket and wrench sets (7/16 to 3/4), screwdrivers, hammer, rubber mallet, 6 torpedo level, square, small pry bar, 10 and 12 adjustable wrenches, imperial measuring tape, Allen key set, and drift.

Job Type & Location
This is a Contract position based out of Brampton, ON.

Pay and Benefits
The pay range for this position is $27.00 - $35.00/hr.

Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors.

Job Type & Location
This is a Contract position based out of Brampton, ON.

Workplace Type
This is a fully onsite position in Brampton,ON.

À propos d'Aerotek

Aerotek® Inc.

fournit des solutions de dotation en personnel et de services dans les domaines de la fabrication, de la logistique, de la construction, de laviation,



des installations et de la maintenance.

Nous offrons lexpertise, les solutions et les personnes nécessaires pour relever les défis de lindustrie nord-américaine.

Basée à Hanover, au Maryland, Aerotek exploite un réseau unifié de plus de 200 bureaux à travers lAmérique du Nord, soutenant plus de 18 000 clients chaque année.

Aerotek est une entreprise du groupe Allegis, leader mondial en ressources humaines et solutions daffaires.

Pour en savoir plus, visitez: Aerotek.com | 1-888-AEROTEK.

Aerotek offre un salaire hebdomadaire, des avantages sociaux y compris des soins médicaux, des soins dentaires et des soins de la vue, ainsi quun programme daide aux employés et un programme de rabais.

La société souscrit au principe dégalité daccès à lemploi et examinera toutes les candidatures sans tenir compte de la race, du sexe, de lâge, de la couleur, de la religion, de lorigine nationale, du statut de vétéran, de handicap, de lorientation sexuelle, de lidentité de genre, de linformation génétique ou de toute autre caractéristique protégée par la loi.

Ordonnance sur légalité des chances de San Francisco:
Conformément à lOrdonnance sur légalité des chances de San Francisco, pour tous les postes situés dans la ville et le comté de San Francisco, nous examinerons les candidatures des personnes qualifiées ayant un casier judiciaire ou des antécédents criminels.

Utilisation de lintelligence artificielle (IA):
Nous pouvons utiliser lintelligence artificielle (IA) pour soutenir certaines étapes de notre processus dembauche, notamment la recherche, la présélection et lévaluation des candidatures.

LIA aide à analyser les candidatures et les qualifications, mais les décisions finales sont prises par notre équipe de recrutement.

En soumettant votre candidature, vous reconnaissez et acceptez que celle-ci puisse être examinée à laide doutils dIA.

About Aerotek

Aerotek® Inc.

provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance.

We provide the expertise, solutions and people required to rise to the challenges of North American industry.

Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year.

Aerotek is an Allegis Group company, the global leader in workforce and business solutions.

To learn more, visit: Aerotek.com | 1-888-AEROTEK.

Aerotek offers weekly pay, employee benefits including medical, dental & vision, employee assistance and discount programs.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Use of Artificial Intelligence (AI):
We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates.

AI helps assess applications and qualifications, but final decisions are made by our hiring team.

By applying, you acknowledge and agree that your application may be reviewed using AI tools.

📌 Mechanical Installation Technicians (Brampton)
🏢 Aerotek
📍 Brampton