POSITION SUMMARY

This position requires the candidate to successfully prepare manufactured sub-assemblies after abrasive blasting to remove all loose particulate for the proper application of the primer and finish coat(s) of paint using the AIRLESS GRACO Paint System

Depending on additional training and skilled abilities, this candidate may also be required to perform other duties and responsibilities to maintain a full-time, 42 hour work week.

This position reports directly to the Manufacturing/ Production Supervisor.

GENERAL ACCOUNTABILITY

- The manufactured sub-assemblies are properly prepared as per pre-paint specifications and will report any defects or deficiencies to the supervisor prior to painting.
- All paint processes are performed and conforms to JDC specifications and requirements.
- Painting schedules are executed and completed to the planned production schedules.
- Maintain the determined inventory level(s) of Paint Products and to also control un-necessary waste.
- Maintain the Painting Equipment along with the Associated Areas in a Safe and Orderly Environment to be in compliance to all Legislated Workplace Safety Procedures.
- Safe and Proper Operation of all related Equipment.

PRIMARY TASKS

- Prepare all metal surfaces after the Commercial Blasting Process is completed.
- Using compressed air to remove any foreign particulate (sand media) prior to placement in the designated paint area.
- Cover any exposed areas that do not require painting.




- Prepare paint (Primer and Finish) Coats to the required viscosity and adjust spraying equipment accordingly to achieve the expected quality of finish.
- Clean, Inspect, Maintain and Store the Paint Equipment as required.
- Clean, Inspect and change Paint Room Filtration as required.
- House Duties in the Painting Area(s)

QUALIFICATION AND REQUIRED EXPERIENCES

- Three to Five years’ experience in a relative field would be an asset jut JDC is willing to train the right candidate.
- Must be highly self- motivated and be able to work independently or in a team environment.
- Must be able to perform and successfully execute the duties and demands in a fast-paced environment.
- This Candidate should possess a valid Fork Lift operator Certificate and have the necessary skills and experience to Safely Manipulate Large Oversize Assemblies
- This position will require the candidate to accept working additional hours (overtime) outside the regular manufacturing hours to maintain the assembly processes.
- All employees are expected and to be prepared to contribute in a Safe and Conscientious Workplace.

JD Conveyors prides itself in promoting and operating as a “Safe and Enjoyable Work Workplace” with a “Team First” approach. Only candidates sharing these same values will be considered.

Part time and full time positions available

Pay: $28.00-$35.00 per hour

Expected hours: 42.0 per week

Work Location: In person

📌 Painter (Ajax)
🏢 JD Conveyors
📍 Ajax